Jump to content

Western Electric vuelve a fabricar válvulas en USA


Recommended Posts

  • Administrador

EXCLUSIVE: WESTERN ELECTRIC CONFIRMS PLANS TO TACKLE THE TUBE CRISIS WITH ITS GEORGIA FACTORY


The pro-audio brand tells Guitar.com how it plans to bring US-made guitar amp tubes back – and why it doesn’t want to charge a premium for doing so.

What does it take to bring century-old technology back to US soil? Georgia-based Western Electric certainly plans to give it a good go. The company currently makes just one type of tube, used in audiophile-grade hifi amplifiers. However, given recent world events, it’s planning on expanding out into others, including – most excitingly for us – those used in guitar amplifiers. If you’ve been keeping an eye on any guitar news sources recently, it’s likely you’ll have seen some worrying headlines about tube amps. For a short while, export bans from Russia looked to completely block the majority of the world’s supply of the tubes used in guitar amps. Aside from the Slovakia-based JJ Electronic, most come from Electro-Harmonix’s Russian factory, branded under the EHX name, or its various sub-brands: Tung-Sol, EH Gold, Genalex Gold Lion, Mullard, Svetlana and Sovtek. Earlier this month, the Rossville, Georgia-based company outlined its plan to leverage its current tube-manufacturing plant – and its well-established expertise – to expand into manufacturing a massive range of tubes, rather than just the 300B. It also asked musicians and designers to share their thoughts on what they would want from a US-based tube factory. Safe to say, it piqued the interest of the guitar community, spreading like wildfire amongst tube-evangelists.
The planned expansion isn’t without its challenges. 80 years ago, tubes were a necessary part of the vast majority of electronics. In 2022, outside of the world of enthusiast tech like hifi and guitar amplifiers, they’re now obsolete, far surpassed in practicality by solid-state transistors. In short, the tools and parts for their manufacture just aren’t as ubiquitous as they once were.
Luckily, Western Electric is well-placed to execute such an expansion – it’s spent years modernising and refining the process of tube manufacturing for its 300B. We got in touch to know more about the company’s plans, and what hurdles it might face.

 

 

western-electric-300b@2000x1500.jpg

Link to comment
Share on other sites

Si, ojo que fabrican solamente una valvula de muy muy baja tecnología, anterior a la segunda guerra mundial (300B).

Compraron el stock de máquinas de EI, que eran máquinas muy viejas y en mal estado, que fabricaban las válvulas de peor calidad que recuerde , y no tienen gente con know how real (los pocos que quedan son ancianos o rusos, lo cual hoy en día parece ser igual de malo).

Me parece más un esfuerzo voluntarista por sacarle los ultimos mangos a unas máquinas que están para la basura y compraron por dos mangos en un remate aprovechando la situación actual que un proyecto serio. De hecho hace poco hicieron una encuesta sobre qué deberían fabricar y parece que recién se enteran de que las 12AX7 son válvulas muy usadas, es todo muy raro y al parecer ya enfilan a hacer un producto muy caro y de calidad poco contrastable.

Ojalá no sea el caso, pero vengo siguiendo el tema de WE hace rato y parece tener un humo tremendo alrededor.

Edited by Rodrigo Gonzalez
  • Like 6
Link to comment
Share on other sites

hace 5 minutos, NachoMan77 dijo:

Supongo que la encuesta busca determinar cuales modelos ADEMAS de 6L6, 6V6, EL34, EL84, 12AXT, 12AT7 (y sus variantes) vale la pena producir. No creo que ese primer grupo esté en duda.

Estaba en duda y eligieron la familia 12A*7. Es muy raro todo, la encuesta no incluía EL34, EL84 ni otras válvulas conocidas, si 6V6/6L6.

Otra cosa que me resulta realmente interesante es cómo van a hacer con las restricciones ambientales, porque por este mismo tema fundieron a la RCA. 

Link to comment
Share on other sites

44 minutes ago, Rodrigo Gonzalez said:

Estaba en duda y eligieron la familia 12A*7. Es muy raro todo, la encuesta no incluía EL34, EL84 ni otras válvulas conocidas, si 6V6/6L6.

Otra cosa que me resulta realmente interesante es cómo van a hacer con las restricciones ambientales, porque por este mismo tema fundieron a la RCA. 

Parece que la EPA es el menor de los problemas. Conseguir proveedores y oagar 15 USD/hora es el mayor escollo.

Interesante entrevista a Aspen Pittman, de hace 14 años atras: https://legendarytones.com/aspen-pittman-interview/

  • Like 1
Link to comment
Share on other sites

  • Administrador
hace 7 horas, Antonio Fracchia dijo:

It would be polite to properly credit the author and to provide a link to the original source of the text, wouldn't it?

Lo copié de un sitio en el cual tampoco citan la fuente. Es un extracto de una noticia aparecida en varios medios, no es algo exclusivo y es evidente que no lo escribí yo… nadie está tratando de adjudicarse nada. Llevo este sitio adelante hace 14 años, sabes cómo me manejo… siempre doy crédito donde corresponde. La verdad, muy flojo tu comentario.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...